Products

Quality engineered excellence since 1987.

molybdenum flotation concentrat

Nitrogen Gas Molybdenum Flotation from Copper

03-09-2018  Feed to the molybdenum flotation circuit is a bulk concentrate of 27% Cu and 0.9% Mo at 55 to 60% -325 mesh produced with the use of sodium isopropyl xanthate, fuel oil, aeroprotnoter 3302, and frother MF-142. Sodium hydrosulphide and

Click

Molybdenum Flotation - 911 Metallurgist

01-08-2015  A Molybdenum Flotation case study with about 6% of the molybdenum contained in the feed is present as an oxide form and about 90% of this is not recovered to the flotation concentrate. Recovery of molybdenum into the rougher concentrate varied between 90 to 95% at a concentrate grade of 2.5 to 3.7% molybdenum. The rougher concentrate can be upgraded to a marketable grade molybdenum concentrate at between 77 to 80% overall molybdenum

Click

Molybdenum Ore Processing by Flotation - 911 Metallurgist

05-05-2016  The Copper/Moly Separation Flowsheet MOLYBDENITE FLOTATION. The high grade copper concentrate from the “Sub-A” Cleaner Flotation Cells will contain from 40%... SELECTIVE FLOTATION CLEANING. The rougher molybdenum concentrate thickener underflow at 65 to 70% solids is removed by a... REGRINDING AND ...

Click

US3426896A - Flotation of bulk concentrates of

The ground feed to flotation contained 5.1% by weight of plus 65 mesh particles and 49.4% by weight of minus 200 mesh particles. After grinding, the pulp was transferred to a Denver laboratory flotation machine, diluted to proper pulp density and the pH adjusted to that required, if necessary.

Click

US4083921A - Purifying molybdenum flotation

Copper, iron, and lead impurities are removed from molybdenum flotation concentrates by mixing the feed concentrates with a nonvolatile chloride salt, heating the mixture to a temperature of from...

Click

Molybdenite flotation from copper/molybdenum

01-11-1990  Typically, rougher molybdenite flotation and recovery from bulk copper/molybdenum concentrates involves the use of alkalisulfides, Nokes reagents, cyanides, oxidants, and/or thermal treatment to depress copper sulfide minerals. The bulk copper/molybdenum feed generally varies from 0.2% Mo to 1.0% Mo, and with traditional reagents the single-stage ...

Click

Flotation separation of copper–molybdenum sulfides using ...

01-11-2015  The flotation tests on single minerals and molybdenum-bearing copper concentrate were carried out using a model XGF-1600 flotation machine operating at 1600 rpm with a 30 mL suspension cell. In a typical test, the mineral slurry was prepared by adding 2 g of a single mineral or molybdenum-bearing copper concentrate to 30 mL of distilled water.

Click

Purifying molybdenum flotation concentrates - Kennecott ...

A process for removing copper, iron, and lead impurities from molybdenum flotation concentrates, comprising mixing a nonvolatile chloride salt with the concentrates in a ratio of about 1 to 4 parts by weight of the chloride salt to 1 part of lead in the concentrates; heating the mixture of concentrates and chloride salt to a temperature of from about 200° to 350° C, for a time sufficient to activate the lead

Click

Gold Recovery from Molybdenum Concentrate by Cyanide

03-04-2018  Since the molybdenum concentrate is normally recovered from the flotation slurry by filtration, a decision to cyanide leach the molybdenum concentrate before filtration and recover the gold from the filtrate solutions was made. For gold recovery from the pregnant leach solutions adsorption on activated carbon was studied.

Click

Molybdenum - Wikipedia

Molybdenite—the principal ore from which molybdenum is now extracted—was previously known as molybdena. Molybdena was confused with and often utilized as though it were graphite. Like graphite, molybdenite can be used to blacken a surface or as a solid lubricant. Even when molybdena was distinguishable from graphite, it was still confused with the common lead ore PbS (now called galena); the name comes from Ancient GreekΜόλυβδος molybdos, meaning lead. (The Greek word itself has been

Click

US3426896A - Flotation of bulk concentrates of

molybdenum copper flotation isothiouronium collector Prior art date 1965-08-20 Legal status (The legal status is an assumption and is not a legal conclusion. Google has not performed a legal analysis and makes no representation as to the accuracy of the status listed.) Expired - Lifetime Application number

Click

Molybdenite flotation from copper/molybdenum

01-11-1990  Typically, rougher molybdenite flotation and recovery from bulk copper/molybdenum concentrates involves the use of alkalisulfides, Nokes reagents, cyanides, oxidants, and/or thermal treatment to depress copper sulfide minerals. The bulk copper/molybdenum feed generally varies from 0.2% Mo to 1.0% Mo, and with traditional reagents the single-stage rougher flotation recovery of molybdenite ...

Click

Molybdenite flotation from copper/molybdenum

Typically, rougher molybdenite flotation and recovery from bulk copper/molybdenum concentrates involves the use of alkalisulfides, Nokes reagents, cyanides, oxidants, and/or thermal treatment to depress copper sulfide minerals. The bulk copper/molybdenum feed generally varies from 0.2% Mo to 1.0% Mo, and with traditional reagents the single-stage rougher flotation recovery of molybdenite ...

Click

Molybdenite flotation from copper/molybdenum concentrates ...

Molybdenite flotation from copper/molybdenum concentrates by ozone conditioning Y. Ye, W.H. Jang, M.R. Yalamanchili, and J.D. Miller Abstract—Typically, rougher molybdenite flotation and recovery from bulk copper! molybdenum concentrates involves the use of

Click

Purifying molybdenum flotation concentrates - Kennecott ...

Copper, iron, and lead impurities are removed from molybdenum flotation concentrates by mixing the feed concentrates with a nonvolatile chloride salt, heating the mixture to a temperature of from about 200° to 350° C for a time sufficient to activate the lead impurities in the concentrates so that they can be leached therefrom during the subsequent leach step, and leaching copper, iron, and ...

Click

molybdenum ore iron concentrat process

Metallurgical ContentThe Molybdenum Process FlowsheetGrindingCoarse Flotation CircuitRegrind CircuitFine Flotation CircuitConcentrate TreatmentTailingsFlotation of Molybdenite from Copper This molybdenum flotation circuit, based on 250 500 tons per 24 hours is designed for low grade molybdenum ore having high grade streaks and with pyrite quartz gangue.

Click

Separation Flotation of Molybdenum-bismuth-sulphur

A poor molybdenum-bismuth-sulphur mixed concentrate with low grade and coarse particles,of which-0. 074 mm account for 64%. Molybdenum and bismuth is mainly intergrowth in the ore. In order to obtain qualified molybdenum concentrate and bismuth concentrate,flotation separation test were carried out. Results indicated that,samples reground to 85%passing 0. 074 mm,via one roughing-one cleaning ...

Click

A process mineralogy approach to optimize molybdenite ...

01-10-2020  The effect of industrial flocculants on the molybdenite flotation capability is investigated in various studies, and the results clearly indicate their depressant effect on molybdenite (Chen et al., 2013, Braga et al., 2014, Castro and Laskowski, 2015).

Click

Review of the flotation of molybdenite. Part I: Surface ...

10-03-2016  Particle size is a very important factor affecting flotation properties of molybdenite. In porphyry copper–molybdenite ores the flotation conditions (grinding, reagents, bubble size, etc.) all are optimized with respect to Cu and not Mo. Fig. 2 shows that the optimum flotation particle size for molybdenite is around 20 μm, and the size fraction 6.8 μm exhibits the lowest recovery and ...

Click

Recovery of Molybdenum Rhenium From

22-05-2017  Molybdenum-rhenium extraction was unaffected by presence of chalcopyrite in the molybdenite concentrate; however, molybdenum extraction declines if the copper content, as chalcocite, exceeds 7 pct. High-purity molybdenum and rhenium compounds can be recovered from the electrolyzed reaction mass by liquid-solid separation, solvent extraction, and crystallization steps.

Click

molybdenum ore iron concentrat process

Metallurgical ContentThe Molybdenum Process FlowsheetGrindingCoarse Flotation CircuitRegrind CircuitFine Flotation CircuitConcentrate TreatmentTailingsFlotation of Molybdenite from Copper This molybdenum flotation circuit, based on 250 500 tons per 24 hours is designed for low grade molybdenum ore having high grade streaks and with pyrite quartz gangue.

Click

Molybdenite flotation from copper/molybdenum

Typically, rougher molybdenite flotation and recovery from bulk copper/molybdenum concentrates involves the use of alkalisulfides, Nokes reagents, cyanides, oxidants, and/or thermal treatment to depress copper sulfide minerals. The bulk copper/molybdenum feed generally varies from 0.2% Mo to 1.0% Mo, and with traditional reagents the single-stage rougher flotation recovery of molybdenite ...

Click

Molybdenite flotation from copper/molybdenum

The bulk copper/molybdenum feed generally varies from 0.2% Mo to 1.0% Mo, and with traditional reagents the single-stage rougher flotation recovery of molybdenite varies between 40% and 90% at a concentrate grade of 5% to 10% Mo.

Click

Review of the flotation of molybdenite. Part I: Surface ...

10-03-2016  Particle size is a very important factor affecting flotation properties of molybdenite. In porphyry copper–molybdenite ores the flotation conditions (grinding, reagents, bubble size, etc.) all are optimized with respect to Cu and not Mo. Fig. 2 shows that the optimum flotation particle size for molybdenite is around 20 μm, and the size fraction 6.8 μm exhibits the lowest recovery and ...

Click

Research Progress on Flotation Separation Technology of ...

Article “Research Progress on Flotation Separation Technology of Copper-molybdenum Mixed Concentrate” Detailed information of the J-GLOBAL is a service based on the concept of Linking, Expanding, and Sparking, linking science and technology information which hitherto stood alone to support the generation of ideas. By linking the information entered, we provide opportunities to make ...

Click

CN101927213A - Flotation separation method for

The invention discloses a flotation separation method for molybdenite and galena, which comprises the following steps of: 1, rough grinding; 2, rough selection and scavenging for obtaining lead-containing molybdenum rough concentrate; 3, regrinding after a certain amount of active carbon is added into the lead-containing molybdenum rough concentrate; and 4, multiple selection: selecting the ...

Click

The solvent extraction separation of bismuth and ...

01-05-2009  In the present study, a process for separation and recovery of bismuth and molybdenum from a low grade bismuth glance flotation concentrate by solvent extraction was studied. N235 (R 3 N, R = C 8 –C 10 , trialkyl amine, a widely-used amic extractant for extracting Zn ( Qiong et al., 2006 ), rare earth ( Chunhua et al., 2006 ), molybdenum and vanadium ( Yun et al., 2006 ), commercialized in ...

Click

molybdenum ore flotation equipment for garnet in korea

molybdenum ore flotation equipment for garnet in korea. Garnet mineral flotation garnet is typically known as a red translucent gemstone, but when beneficiated and appropriately sized, is used to make a harder abrasive alternative to quartz after processing, almandine garnet features angular grains and has a hardness of on the mohs scale compared to quartz at only

Click

OPTIMIZATION OF FLOTATION PARAMETERS FOR

flotation of molybdenite ore. Meanwhile, the kinetics of batch flotation behavior of the molybdenum ore was obtained by applying the first order and second order kinetics models. The results indicated that the flotation rate constant responds to second-order kinetics model with

Click

新型钼捕收剂飞瑞7 # 在辽宁某难选钼矿石浮选中的应用研究-Study of Novel Molybdenum ...

飞瑞7 # 是一种新型的钼矿物浮选捕收剂,它对钼矿物捕收力强并兼具起泡性能,浮选过程中能形成稳定的泡沫层。对辽宁某难选钼矿石不仅能提高钼选矿回收率并可节省起泡剂用量30%以上。;Florrea 7# is an novel flotation collector for the molybdenum froth flotation. It is powerful in collecting molybdenum and also with strong ...

Click

Molybdenite flotation from copper/molybdenum

Typically, rougher molybdenite flotation and recovery from bulk copper/molybdenum concentrates involves the use of alkalisulfides, Nokes reagents, cyanides, oxidants, and/or thermal treatment to depress copper sulfide minerals. The bulk copper/molybdenum feed generally varies from 0.2% Mo to 1.0% Mo, and with traditional reagents the single-stage rougher flotation recovery of molybdenite ...

Click

Molybdenum Processing - IMOA

Flotation separates the metallic minerals from the gangue this way and – in the case of copper/ molybdenum ores – separates molybdenite from copper sulphide. The resulting MoS 2 concentrate contains between 85% and 92% MoS 2 .

Click

Review of the flotation of molybdenite. Part I: Surface ...

10-03-2016  Particle size is a very important factor affecting flotation properties of molybdenite. In porphyry copper–molybdenite ores the flotation conditions (grinding, reagents, bubble size, etc.) all are optimized with respect to Cu and not Mo. Fig. 2 shows that the optimum flotation particle size for molybdenite is around 20 μm, and the size fraction 6.8 μm exhibits the lowest recovery and ...

Click

Molybdenum Flotation Circuit and Flotation Cells

With the steady increase of molybdenum demand worldwide and the favorable molybdenum market, many technological innovations on both process and equipment have been developed and applied in many modern molybdenum plants around the world. This paper introduces the most commonly used molybdenum flotation flowsheet, together with the introduction of the flotation chemistry.

Click

Research Progress on Flotation Separation Technology of ...

Article “Research Progress on Flotation Separation Technology of Copper-molybdenum Mixed Concentrate” Detailed information of the J-GLOBAL is a service based on the concept of Linking, Expanding, and Sparking, linking science and technology information which hitherto stood alone to support the generation of ideas. By linking the information entered, we provide opportunities to make ...

Click

CN101927213A - Flotation separation method for

The invention discloses a flotation separation method for molybdenite and galena, which comprises the following steps of: 1, rough grinding; 2, rough selection and scavenging for obtaining lead-containing molybdenum rough concentrate; 3, regrinding after a certain amount of active carbon is added into the lead-containing molybdenum rough concentrate; and 4, multiple selection: selecting the ...

Click

US4523948A - Roasting of molybdenite concentrates ...

A method is provided for treating molybdenum concentrates in a roasting furnace having a first roasting zone and at least a second roasting zone, the concentrate containing residual flotation oil in an amount over 2% by weight which during roasting inhibits the roasting capacity of the furnace. The improvement resides in deoiling the molybdenite concentrate, feeding the deoiled concentrate to ...

Click

INVESTIGATION OF EFFECTIVE PARAMETERS FOR MOLYBDENITE ...

Flotation schemes for the separation of molybdenite from ores are based on the inherent natural flotation of molybdenite. Chander and Fuerstenau (1972) undertook a detailed investigation to elucidate the factors that affect the surface properties of MoS 2 which in turn govern the natural flotation of molybdenite.

Click

OPTIMIZATION OF FLOTATION PARAMETERS FOR

flotation of molybdenite ore. Meanwhile, the kinetics of batch flotation behavior of the molybdenum ore was obtained by applying the first order and second order kinetics models. The results indicated that the flotation rate constant responds to second-order kinetics model with

Click

Molybdenum disulfide - Wikipedia

Molybdenum disulfide (or moly) is an inorganic compound composed of molybdenum and sulfur.Its chemical formula is MoS 2.. The compound is classified as a transition metal dichalcogenide.It is a silvery black solid that occurs as the mineral molybdenite, the principal ore for molybdenum. MoS 2 is relatively unreactive. It is unaffected by dilute acids and oxygen.

Click